TIG welding is a popular welding process but only a few know how the TIG process works. This blog will discuss some of the basics of the TIG welding process.
The TIG welding process is also known as the TIG (Tungsten Inert Gas) process. The TIG welder heats the piece of metal being welded (the "heat source") and then passes an electrical current through the metal from one electrode to another using an electric arc. Tungsten Inert Gas Welding, or Metal Inert Gas Welding, it is most often referred to as TIG welding. The TIG welding process begins with a base metal electrode, which is usually made from tungsten or nickel. This electrode is then heated until it glows red. The torch is then moved over a piece of workpiece material and held there until the base metal electrode melts, creating an arc between it and the workpiece material.
Metals That Can be Wild by TIG Welding Process:
The TIG welding process is known as wire feeding because it uses continuous wire feeders to move around pieces of material to be welded together. The continuous wire feeders are also known as spools or spooling machines. Each spool has one or more wires wrapped around it and can hold multiple wires in each spool depending on how many wires there are available for use in the TIG welding process. Once all of these wires have been fed into the machine, they are then fed into whatever position they need to be in so that they can be used for their specific purpose during welding operations. The most common metals that can be welded with the TIG welding process are stainless steel, aluminum, and carbon steel. Other types of metal include titanium, nickel alloys, and cobalt alloy steels.
Electrode Used for TIG Welding Process:
The TIG welding process is a technique used in many industries, including aerospace, automotive, and shipbuilding. The TIG welding process requires the use of an electrode to create a weld between the pieces being joined. The electrode works by creating a plasma arc that melts the metal and fuses it.
The electrode is an essential component in this process. An electrode is a rod of tungsten that is heated up to high temperatures for welding metals together. Two types of electrodes are used during the TIG welding process: stick and flux-cored electrodes. Stick electrodes are made from tungsten and are used for making fillet welds on aluminum alloys, stainless steel, and copper alloys. Flux-cored electrodes also contain tungsten but they have been coated with flux and then dipped in molten metal before they're put into use.
Steps of the TIG Welding Process:
Prepare the tungsten electrode:
Tungsten electrodes come in a variety of shapes, sizes, materials, and coatings. Some are designed for specific applications while others are made specifically with TIG welding in mind. Tungsten electrodes for the TIG welding process may be prepared by:
Clean the tungsten electrode with steel wool and a wire brush.
Sand the tungsten electrode using a wire brush if necessary to remove any dust particles from the surface of the electrode.
Wash off any remaining sanding residue with water and mild detergent or soap if desired.
Fit the tungsten electrode into the torch:
The tungsten electrode is the most important part of a TIG welder. Without it, you won't be able to weld. You need to make sure that your tungsten electrode fits in your torch perfectly and doesn't have any cracks or chips in it. If you don't do this, then you will have a hard time welding with your tungsten rod because it may break easily when you are trying to weld with it.
Compute amperage and voltage:
The amperage of an arc welder is determined by the size of the wire and its heat rating. The voltage determines how much current flows through a circuit. When you use an arc welder, you must know what these two values are so that you can calculate the correct amperage setting for your particular wires.
Maintain perfect angle between electrode, workpiece, and filler rod:
The base electrode is used to produce the melt between the workpiece and filler rod. The electrode should be fed in at an angle of 45° to 90° concerning the joint line of the plate. The exact angle depends on the material being welded and its thickness. A TIG welding process must maintain a perfect angle between the electrode, workpiece, and filler rod for the TIG welding process.
End Note on TIG Welding Process:
When you want the best TIG welding process, you need the best quality TIG welding machine. Here, only Tribet can provide the best quality TIG welding machine. So, you should buy the TIG Welding machine from Tribet because we are the best TIG Welding machine on the market. Tribet has been manufacturing welding machines for more than 8 years and we have a lot of experience in this field. The technology used by Tribet is very sophisticated and advanced. We use some new technology. This technology makes it possible for us to produce welding machines that are very lightweight so that you can carry them around easily.
Tribet’s TIG Welding machines are also very easy to use. Our products are designed to be used by anyone without any previous experience with welding machines or electricity. This makes them very accessible for everyone who wants to start working as a welder without having any technical knowledge about welding machines. Just follow our instructions and you will be fine.
0 
